AR1026 Logarithmic antenna high gain TRIBAND GSM DCS UMTS 870-2170MHz
MOD. AR1026.Z - COD. ARLP67892012.Z
TRI-BAND LOG-PERIODIC DIRECTIONAL ANTENNA - 870 to 2170 MHz
High-gain logarithmic (log-periodic) antenna engineered for tunnel and underground radio coverage and
donor links in GSM / GSM-R, DCS, UMTS, LTE and related deployments (including 5G planning in 1800/2100 MHz bands depending on spectrum).
Key figures: Gain typ. 12 dBi, VSWR ≤ 1.5, F/B ≥ 25 dB, 50 Ohm, vertical polarization, fiberglass full radome.
ELECTRICAL DATA
Frequency range (MHz): 870÷2170
Bandwidth (MHz): 1300
Gain typ. (dBi): 12
VSWR: <= 1.5
Nominal impedance (Ohm): 50
Polarization: V
E beamwidth typ. -3 dB: 40°
H beamwidth typ. -3 dB: 50°
Front back ratio (dB): >= 25
Max Power (W): N = 100 / 7/16 = 100
Connector: N or 7/16 female
Lightning protection: All metal parts are D.C. grounded
MECHANICAL DATA
Dimension (mm): diameter 330 x 1000
Weight (Kg): 5
Mounting diameter (mm): 40÷114
Ice protection: Fiberglass full radome
MATERIALS
Aluminium - Teflon - Brass - Stainless steel
ACCESSORIES
AR1026F: 1 clamp, diameter 40-80 mm, 2.7 kg
AR1026T: 2 tilt clamps, diameter 40-114 mm, 4.2 kg
The AR1026 is a log-periodic (logarithmic) directional antenna designed to provide
stable broadband performance across the 870÷2170 MHz range, covering the key mobile and railway-related bands
typically used for GSM / GSM-R (900), DCS (1800), UMTS (2100) and
LTE deployments. Within the same frequency blocks, it can also be integrated in network roadmaps that consider 5G NR refarming
(e.g., 1800/2100 MHz) according to local spectrum allocations and system design.
In real projects, the AR1026 is selected for challenging propagation environments where controlled directivity is required:
road and motorway tunnels, railway tunnels, metro tunnels, underground stations,
technical galleries and utility corridors, as well as complex indoor infrastructures where repeaters and DAS nodes must be fed efficiently.
Thanks to a high front-to-back ratio (≥ 25 dB) and consistent beamwidths, it supports clean sector illumination,
reduces unwanted back radiation and helps improve link stability in donor antenna configurations towards BTS/repeaters,
as well as in directional coverage tasks inside confined environments.
The antenna is supplied with a full fiberglass radome for protection against impacts and harsh conditions typically found in tunnels and technical areas.
All metal parts are D.C. grounded, simplifying bonding and improving robustness in professional installations.
Connection options include N female or 7/16 female to match standard feeder systems and site requirements.
Antenna designed and manufactured in Italy.
Frequently asked questions about AR1026
Practical answers for tunnel coverage and donor/repeater projects using the AR1026 log-periodic directional antenna.
Where is AR1026 typically installed?
The AR1026 is commonly used in road, railway and metro tunnels, technical galleries and underground corridors,
as well as in complex indoor infrastructures where directional control improves coverage efficiency.
Can AR1026 be used as a donor antenna?
Yes. With its directional pattern and front-to-back ratio ≥ 25 dB, AR1026 is suitable as a
donor antenna towards BTS/repeaters and DAS nodes, helping reduce unwanted back radiation and stabilizing the link.
Which services are covered by the 870-2170 MHz band?
The band is typically used for GSM / GSM-R (900), DCS (1800) and UMTS (2100),
and can be applied to LTE deployments within the same blocks. 5G use depends on the specific spectrum refarming plan and national allocations.
Which connectors are available?
AR1026 can be supplied with N female or 7/16 female connector to match standard feeder systems and site requirements.
How does grounding help in tunnel installations?
All metal parts are D.C. grounded, simplifying bonding practices and improving robustness in professional installations,
especially in confined environments and technical areas.
Related topics and searches
Typical queries and applications related to the AR1026 and similar Protel tunnel antennas:
log periodic tunnel antenna 870-2170 MHz
tri-band GSM DCS UMTS antenna
donor antenna for repeaters and DAS
GSM-R tunnel coverage antenna
DCS 1800 UMTS 2100 directional antenna
underground galleries and indoor coverage
front-to-back ratio 25 dB antenna
5G refarming 1800 2100 antenna
CELLULAR ANTENNA - MOBILE COMMUNICATION
Shrouded Logarithmic - logarithmic antenna for tunnel - high gain
VISIT "ANTENNAKIT" – BEST QUALITY – LOWER PRICE – CLICK BELOW
MOD. AR1026. Z- COD. ARLP67892012. Z
Logarithmic antenna Frequency range 870-2170MHz
Applications:
GSM DCS UMTS coverage in-Tunnel and Donor antenna
Logarithmic TRI-BAND antenna, especially suitable for tunnel broadband coverage. Supplied with fiberglass radome.
CELLULAR ANTENNA - MOBILE COMMUNICATION
Shrouded Logarithmic - logarithmic antenna for tunnel - high gain
ELECTRICAL DATA
Frequency range MHz 870÷2170
Bandwidth MHz 1300
Gain typ. dBi 12
VSWR <=1.5
Nominal impedance 50 Ohm
Polarization V
E beamwidth typ. -3 dB 40°
H beamwidth typ. -3 dB 50°
Front back ratio dB >=25
Max Power W N=100 7/16=100
Connector N or 7/16 female
Lightning protection All metal parts are D.C. grounded
MECHANICAL DATA
Dimension length diameter 330 x 1000 mm.
Weight Kg 5
Mounting diameter 40÷114 mm.
Ice protection Fiberglass full radome
MATERIALS
Aluminium – Teflon – Brass – Stainless steel
ACCESSORIES
CODE TYPE DIMEN. WEIGHT
AR1026F 1 clamp diameter 40-80 mm. 2.7 kg.
AR1026T 2 tilt clamps diameter 40-114 mm. 4.2 kg.
Frequency range MHz 870÷2170
Bandwidth MHz 1300
Gain typ. dBi 12
VSWR <=1.5
Nominal impedance 50 Ohm
Polarization V
E beamwidth typ. -3 dB 40°
H beamwidth typ. -3 dB 50°
Front back ratio dB >=25
Max Power W N=100 7/16=100
Connector N or 7/16 female
Lightning protection All metal parts are D.C. grounded
MECHANICAL DATA
Dimension length diameter 330 x 1000 mm.
Weight Kg 5
Mounting diameter 40÷114 mm.
Ice protection Fiberglass full radome
MATERIALS
Aluminium – Teflon – Brass – Stainless steel
ACCESSORIES
CODE TYPE DIMEN. WEIGHT
AR1026F 1 clamp diameter 40-80 mm. 2.7 kg.
AR1026T 2 tilt clamps diameter 40-114 mm. 4.2 kg.