Go to content

AR1050 High-Gain Directional Yagi Antenna 695–915 MHz for LTE / GSM - Protel Antennas - Professional Antennas for Telecomunications

Protel Antennas 38 years - 2026
Logo Protel antennas
PROFESSIONAL ANTENNAS
FOR TELECOMMUNICATIONS
SELECT THE FREQUENCY BAND
Skip menu
SELECT THE FREQUENCY BAND
Skip menu

AR1050 High-Gain Directional Yagi Antenna 695–915 MHz for LTE / GSM

AR1050 - HIGH-GAIN DIRECTIONAL YAGI ANTENNA 695-915 MHz (LTE / GSM LOW-BAND)

The AR1050 is a professional high-gain directional antenna designed for reliable low-band coverage in demanding infrastructures. It is especially suitable for highway, railway and subway tunnels, and for donor/service links in repeater and DAS systems where a controlled radiation pattern is essential.

AR1050 High gain Yagi Directional antenna  lte GSM 695 - 915 MHz
ELECTRICAL DATA
Frequency range: 695 ÷ 915 MHz
Bandwidth: 220 MHz
Gain max.: 13 dBi
Return loss: ≥ -14 dB
VSWR: ≤ 1.5:1
Nominal impedance: 50 Ω
Polarization: V
H beamwidth typ. -3 dB: 40°
E beamwidth typ. -3 dB: 35°
Max power: 200 W
Connector: 7/16 F
Lightning protection: All metal parts are D.C. grounded
MECHANICAL DATA
Dimension length: Ø 330 x 800 mm
Weight without clamp: 4.5 kg
Wind load (160 Km/h): 156 N
Mounting: Ø 40 ÷ 114 *
MATERIALS
Aluminium - Teflon - Brass -
ACCESSORIES
AR1050.1F / AR1050.1Fi: 1 clamps, 3 kg - hot-dip galvanizing / 316 stainless steel - Mounting Ø 40x80
AR1050.1T / AR1050.1Ti: 2 clamps, 4.2 kg - hot-dip galvanizing / 316 stainless steel - Mounting Ø 40x114
AR1050.1RI: fiberglass FLAME RETARDANT RADOME
ORDERING AND PACKAGING INFORMATIONS
Packaging: 1000x410x410 mm - Kg 10

The 695-915 MHz range is widely associated with low-band cellular deployments around 700/800/850/900 MHz depending on national spectrum plans and operator strategies. In real projects, these low-band layers are chosen to maximize coverage reach, improve penetration and support service continuity, especially in complex environments where signal stability matters more than peak throughput.

The AR1050 is engineered for professional infrastructures where antennas must combine directivity, mechanical robustness and predictable on-site behavior. Typical use cases include donor antennas toward the BTS/site, directional links in RF distribution networks, and tunnel-focused architectures where controlled patterns help reduce unwanted signals and improve the quality of coverage along the route.

For highway, railway and subway tunnels, antenna selection is normally integrated with the passive RF chain (filters, splitters, combiners, couplers and duplexing) to manage isolation, distribute power and limit interference. In these scenarios, correct aiming, stable mounting and periodic maintenance are essential to preserve long-term performance in the presence of wind, vibration and structural stress.

Antennas designed and manufactured in Italy.

If you need a fast technical recommendation, share the target plan (700/800/850/900), the installation scenario (tunnel, outdoor donor link, DAS/repeater), required polarization, connector preference and mechanical constraints to match the optimal AR1050 configuration and mounting kit.

Protel Antennas - Made in Italy

Frequently asked questions about AR1050

Key answers for selecting and deploying the AR1050 directional Yagi antenna in 695-915 MHz LTE/GSM low-band projects.

What is the frequency range of the AR1050?
According to the datasheet, the AR1050 covers 695 ÷ 915 MHz, suitable for low-band LTE/GSM deployments depending on local spectrum plans.
Why is the AR1050 ideal for tunnels?
Its directional pattern and high gain support controlled coverage along corridors and tunnels, helping service continuity in highway, railway and subway infrastructures and in repeater/DAS architectures.
Does the AR1050 include DC grounding for lightning protection?
Yes. The datasheet states that all metal parts are D.C. grounded, supporting lightning protection in professional installations.
Which connector is supplied?
The AR1050 is supplied with a 7/16 F connector, commonly selected for robust RF connections in higher-power infrastructures.
Is a flame-retardant radome available?
Yes. The AR1050.1RI option provides a fiberglass flame-retardant radome for safety-oriented or demanding environments.

Related topics and searches

Typical queries and applications related to the AR1050 and similar Protel low-band Yagi antennas:

AR1050 Yagi antenna 695-915 MHz directional antenna LTE 700 / LTE 800 antenna GSM 850 / GSM 900 antenna tunnel antennas for repeaters railway & subway tunnel coverage donor antenna 7/16 connector DAS low-band antenna flame retardant fiberglass radome high gain Yagi for tunnels
VISIT "ANTENNAKIT" - BEST QUALITY - LOWER PRICE - CLICK BELOW
https://www.antennaskit.com/
CONTACT
COMPANY
NEW
OTHER APPLICATIONS
PROTEL Antennas Via Magellano 3 A/B 6
20090 CESANO BOSCONE (MILANO) ITALY
Phone+39.02.48600265 Fax+39.02.48600871
P.I. 09497700154 REA 126350
Copyright PROTEL
1988-2026 All Rights Reserved
Back to content