ARD028KW System FM dipole antenna 87.5- 108 MHz Protel
FM dipole antenna manufactured in stainless steel, with internal parts in silver-plated brass, copper-plated and silver-plated aluminium and teflon.
The ARD028KW.1 is designed for high-power collinear FM broadcast systems in the 87.5–108 MHz band, operating continuously even under severe weather conditions on towers, rooftops and mountain sites.
The ARD028KW.1 is designed for high-power collinear FM broadcast systems in the 87.5–108 MHz band, operating continuously even under severe weather conditions on towers, rooftops and mountain sites.
FM ANTENNA
MOD. ARD028KW.1 – COD. ARDL213JZ
Collinear FM dipole antenna for the 87.5–108 MHz band
ELECTRICAL DATA
Frequency range MHz: 87.5–108
Bandwidth MHz: 20.5
Gain typ. dBi: 3.5
VSWR: ≤ 1.5
Nominal impedance Ω: 50
Polarization: V–H
E beamwidth typ. –3 dB: 80°
H beamwidth typ. –3 dB: 88 MHz = 360°; 108 MHz = 300°
Max Power W: 8000
Connector: 1+5/8
Lightning protection: All metal parts are D.C. grounded
Bandwidth MHz: 20.5
Gain typ. dBi: 3.5
VSWR: ≤ 1.5
Nominal impedance Ω: 50
Polarization: V–H
E beamwidth typ. –3 dB: 80°
H beamwidth typ. –3 dB: 88 MHz = 360°; 108 MHz = 300°
Max Power W: 8000
Connector: 1+5/8
Lightning protection: All metal parts are D.C. grounded
MECHANICAL DATA
Dimension length mm: 900 × 1380 × 80
Weight kg: 9.5
Ice protection: No full radome
Dimension length mm: 900 × 1380 × 80
Weight kg: 9.5
Ice protection: No full radome
MATERIALS
Aluminium – Teflon – Brass – Stainless steel
Aluminium – Teflon – Brass – Stainless steel
ACCESSORIES
Code: ARD028F – Type: 1 clamp – Diameter: 60–114 mm – Weight: 4.5 kg
Code: ARD028F – Type: 1 clamp – Diameter: 60–114 mm – Weight: 4.5 kg
Thanks to its 8000 W maximum power rating and carefully controlled radiation pattern, the ARD028KW.1 is suitable as a base element for multi-bay FM arrays used in national, regional and local radio networks.
The antenna can be completely pressurised, helping to protect the RF components from moisture and contaminants and to maintain stable impedance and low VSWR throughout long-term operation.
The antenna can be completely pressurised, helping to protect the RF components from moisture and contaminants and to maintain stable impedance and low VSWR throughout long-term operation.
Frequently asked questions about ARD028KW.1
Some common questions about the ARD028KW.1 high-power FM dipole antenna for 87.5–108 MHz collinear systems:
In which FM broadcast systems is the ARD028KW.1 typically used?
The ARD028KW.1 is designed for high-power collinear FM arrays in the
87.5–108 MHz band. It is typically used in national, regional and local
FM radio networks where high ERP, robust coverage and long-term reliability are required.
What are the main construction features and materials?
The antenna is built in stainless steel, with internal parts in
silver-plated brass, copper-plated and silver-plated aluminium and
teflon. This structure ensures high mechanical strength, excellent corrosion
resistance and stable RF behaviour in harsh outdoor environments.
Can the ARD028KW.1 be completely pressurised?
Yes. The ARD028KW.1 can be fully pressurised, protecting the RF components from
humidity and contamination and helping to maintain constant impedance and low VSWR
during long-term service, even in severe climatic conditions.
Which connector and mounting accessories are available?
The antenna is supplied with a 1+5/8 RF connector for high-power FM systems.
For mechanical installation, the ARD028F clamp is available, suitable for
60–114 mm mast diameters and designed for secure mounting on towers and
support structures.
Related topics and searches
Typical queries and applications related to the ARD028KW.1 and similar Protel FM antennas:
High-power FM dipole antenna 87.5–108 MHz
8000 W FM broadcast antenna
Stainless-steel FM antenna for towers
Collinear FM array base element
V/H polarised FM broadcast antenna
FM antenna for national and regional networks
Protel FM antenna systems for radio broadcasters
VISIT "ANTENNAKIT" – BEST QUALITY – LOWER PRICE – CLICK BELOW