Go to content

ARDC113.Z Omnidirectional Dipole Antenna 2-87 MHz Protel - Protel Antennas - Professional Antennas for Telecomunications

Protel Antennas 38 years - 2026
Logo Protel antennas
PROFESSIONAL ANTENNAS
FOR TELECOMMUNICATIONS
SELECT THE FREQUENCY BAND
Skip menu
SELECT THE FREQUENCY BAND
Skip menu

ARDC113.Z Omnidirectional Dipole Antenna 2-87 MHz Protel

The ARDCKM-A-13X is an omnidirectional narrowband FM dipole antenna for the 50–87 MHz band, with a typical bandwidth of 4 MHz and 3.7 dBi maximum gain. It has a stainless-steel support and a radiant dipole in aluminium or stainless steel, providing high mechanical performance even in severe climatic conditions.
In addition to the standard configuration, Protel can supply customised ARDC (omnidirectional) and ARYC (directional) antennas tuned within 50–87 MHz, with different mechanical options and materials to match specific site requirements. A PVC radome and hot-dip galvanised clamp are available as accessories, allowing reliable installation on masts and structures in professional FM and VHF systems.

MOD. ARDCKM-A-13X

ARDCKM-A-13X Omnidirectional Dipole Antenna 50-87 MHz  Protel
horizontal vertical Diagram ominidirectional Dipole Antenna ARDCKM-A-13X 50 87 Mhz
ELECTRICAL  DATA
Frequency range A MHz 50 ÷ 87
Bandwidth MHz 4
Gain  max. dBi 3.7
Return loss dB ≥ -14
VSWR ≤ 1.5:1
Nominal impedance Ω 50
Polarization Ω V/H
H beamwidth      typ.   -3 dB 190°
E beamwidth      typ. -3 dB 90°
Max Power W  700 w (Nf) 1.5Kw (7/16”)
Connector Nf – 7/16”f
Lightning protection All metal parts are D.C. grounded
MECHANICAL  DATA
Dimension length m.b mm 2200X1000x40
Weight without clamp kg 2 *
Wind surface m² Front 0.05 side 0.08
Front wind load Kg 7.5  ( 160 Km/h )
Side wind load Kg 12.5  ( 160 Km/h )
Mounting mm Ø 60 ÷ 114
MATERIALS
Stainless steel – Teflon – Brass –
ACCESSORIES
RAD5087 RADOME Polyvinyl chloride
ZAFZ25/114C CLAMP hot-dip galvanizing Weight 1.9 Kg
ORDERING AND PACKAGING INFORMATIONS
ARDCKM-A-13XA ALLUMINIUM DIPOLE
ARDCKM-A–13XI STAINLESS STEEL DIPOLE
PACKAGING mm. 2300x180x180 / Total weight with clamp 4 Kg

Protel Antennas - Made in Italy

Frequently asked questions about ARDCKM-A-13X

Some common questions about the ARDCKM-A-13X omnidirectional narrowband FM antenna 50–87 MHz:

For which applications is the ARDCKM-A-13X antenna used?
The ARDCKM-A-13X is an omnidirectional narrowband FM dipole antenna for the 50–87 MHz band, with 4 MHz bandwidth and 3.7 dBi gain. It is suitable for professional VHF and FM systems that require a 360° azimuth pattern and linear V/H polarisation, such as broadcast networks, fixed base stations and coverage systems in harsh environmental conditions.
Which electrical performance does the ARDCKM-A-13X offer?
According to the technical data, the ARDCKM-A-13X operates from 50 to 87 MHz with 4 MHz bandwidth, maximum gain of 3.7 dBi, return loss ≥ -14 dB, VSWR ≤ 1.5:1 and 50 ohm nominal impedance. The antenna provides typical -3 dB beamwidths of about 190° in the H-plane and 90° in the E-plane, and supports up to 700 W RF power with N connector or 1.5 kW with 7/16” connector. All metal parts are DC grounded for lightning protection.
What mechanical characteristics does the ARDCKM-A-13X have?
The ARDCKM-A-13X has approximate dimensions of 2200 x 1000 x 40 mm and a weight of about 2 kg without clamp. The wind surface is around 0.05 m² front and 0.08 m² side, with corresponding wind loads of 7.5 kg (front) and 12.5 kg (side) at 160 km/h. Mounting is provided for masts with Ø 60–114 mm.
Which materials and accessories are available for the ARDCKM-A-13X?
The antenna uses stainless steel, Teflon and brass, with a stainless-steel support and radiant dipole in aluminium or stainless steel. Accessories include the RAD5087 polyvinyl chloride radome and the ZAFZ25/114C hot-dip galvanised clamp (about 1.9 kg). Ordering codes are ARDCKM-A-13XA for the aluminium dipole and ARDCKM-A-13XI for the stainless steel dipole; packaging is approximately 2300 x 180 x 180 mm with a total weight of about 4 kg including clamp.

Related topics and searches

Typical queries and applications related to the ARDCKM-A-13X omnidirectional FM antenna:

50–87 MHz omnidirectional FM antenna narrowband VHF dipole antenna 4 MHz stainless-steel support FM antenna 3.7 dBi 50 ohm V/H polarisation 700 W / 1.5 kW FM antenna N or 7/16” radome and hot-dip galvanised clamp ZAFZ25/114C Protel omnidirectional FM antennas 50–87 MHz

VISIT "ANTENNAKIT" – BEST QUALITY – LOWER PRICE – CLICK BELOW

www.antennaskit.com

CONTACT
COMPANY
NEW
OTHER APPLICATIONS
PROTEL Antennas Via Magellano 3 A/B 6
20090 CESANO BOSCONE (MILANO) ITALY
Phone+39.02.48600265 Fax+39.02.48600871
P.I. 09497700154 REA 126350
Copyright PROTEL
1988-2026 All Rights Reserved
Back to content