ARL470F700XS ITU-R DVB-T Directional Log-Periodic Measurement Antenna 470–700 MHz
DIRECTIONAL UHF MEASUREMENT ANTENNA FOR ITU-R DVB-T/DVB-T2 TELEVISION PLANNING AND BROADCAST SURVEYS, COVERING 470–700 MHz
MOD. ARL470F700XS – COD. ARL470F700XS
Measurement - Monitoring Antenna
MOD. ARL470F700XS – COD. ARL470F700XS
Measurement - Monitoring Antenna
Complete manual including:
• Internal calibration with typical gain factor
• Datasheet with general product characteristics
• Certificate of Conformity including the product serial number
• H/V radiation patterns
• Return loss test report
• K-factor calculation
• Assembly instructions
• Internal calibration with typical gain factor
• Datasheet with general product characteristics
• Certificate of Conformity including the product serial number
• H/V radiation patterns
• Return loss test report
• K-factor calculation
• Assembly instructions
ELECTRICAL DATA
Frequency range A MHz 470 ÷ 700
Bandwidth MHz 230
Gain max. dBi 12
Return loss dB ≥ -14
VSWR ≤ 1.5:1
Nominal impedance Ω 50
Polarization V/H
H beamwidth 480 Mhz -3 dB 44°
H beamwidth 600 Mhz -3 dB 48°
H beamwidth 750 Mhz -3 dB 60°
E beamwidth 480 Mhz -3 dB 40°
E beamwidth 600 Mhz -3 dB 42°
E beamwidth 750 Mhz -3 dB 42°
Max Power W 300 W
Connector Nf
Lightning protection All metal parts are D.C. grounded
MECHANICAL DATA
Dimension length mm 1250X340x70
Elements numbers 17
Weight without clamp kg 1.9
Wind surface m² Front 0.01 side 0.03
Front wind load Kg 0.15 ( 25 m/s )
Side wind load Kg 2.1 ( 25 m/s )
Mounting +/- 90° mm standard polarizer Ø 30
MATERIALS
Anticorodal aluminium - Brass - Teflon - Polyvinyl chloride - RoHS compliance
ACCESSORIES
SUPIS01 Isolation fiberglass pole Ø 35 x 1000
BAG470F700 Transport bag
ORDERING AND PACKAGING INFORMATIONS
PACKAGING mm. 1280x200x200 / weight 2.5 Kg
Frequency range A MHz 470 ÷ 700
Bandwidth MHz 230
Gain max. dBi 12
Return loss dB ≥ -14
VSWR ≤ 1.5:1
Nominal impedance Ω 50
Polarization V/H
H beamwidth 480 Mhz -3 dB 44°
H beamwidth 600 Mhz -3 dB 48°
H beamwidth 750 Mhz -3 dB 60°
E beamwidth 480 Mhz -3 dB 40°
E beamwidth 600 Mhz -3 dB 42°
E beamwidth 750 Mhz -3 dB 42°
Max Power W 300 W
Connector Nf
Lightning protection All metal parts are D.C. grounded
MECHANICAL DATA
Dimension length mm 1250X340x70
Elements numbers 17
Weight without clamp kg 1.9
Wind surface m² Front 0.01 side 0.03
Front wind load Kg 0.15 ( 25 m/s )
Side wind load Kg 2.1 ( 25 m/s )
Mounting +/- 90° mm standard polarizer Ø 30
MATERIALS
Anticorodal aluminium - Brass - Teflon - Polyvinyl chloride - RoHS compliance
ACCESSORIES
SUPIS01 Isolation fiberglass pole Ø 35 x 1000
BAG470F700 Transport bag
ORDERING AND PACKAGING INFORMATIONS
PACKAGING mm. 1280x200x200 / weight 2.5 Kg
Directional broadband antenna for UHF radioelectric measurements aligned with ITU-R recommendations for television planning in digital terrestrial TV (DVB-T / DVB-T2).
Operating in the 470–700 MHz UHF range, it supports professional radiomonitoring and broadcasting survey workflows where directionality improves selectivity and helps isolate the wanted transmitter during measurements and troubleshooting.
Typical applications include UHF broadcast field-strength measurements, coverage and network planning checks, acceptance and maintenance surveys, drive tests, and interference diagnostics in DVB-T/DVB-T2 environments (depending on national allocations within the covered band).
Radiomonitoring
Direction Finding Antennas
RF Signal Search and Survey
Monitoring and measurement of RF signals
Antenna designed and manufactured in Italy.
Typical applications include UHF broadcast field-strength measurements, coverage and network planning checks, acceptance and maintenance surveys, drive tests, and interference diagnostics in DVB-T/DVB-T2 environments (depending on national allocations within the covered band).
Radiomonitoring
Direction Finding Antennas
RF Signal Search and Survey
Monitoring and measurement of RF signals
Antenna designed and manufactured in Italy.
Frequently asked questions about ARL470F700XS
Quick answers for ITU-R DVB-T/DVB-T2 planning surveys and UHF (470–700 MHz) broadcast measurement workflows.
What is the ARL470F700XS used for?
Directional UHF measurements for radiomonitoring, DVB-T/DVB-T2 planning surveys, coverage checks and interference diagnostics across 470–700 MHz.
Which services fall inside 470–700 MHz?
This span is widely used for UHF television broadcasting (digital terrestrial TV such as DVB-T/DVB-T2, depending on national allocations) and is a common area for wideband broadcast surveys and troubleshooting.
Why choose a directional log-periodic antenna for DVB-T/DVB-T2 measurements?
Directionality improves selectivity and reduces off-axis pickup, supporting repeatable measurements and helping direction indication when searching for unwanted emissions.
What does V/H polarization mean in practice?
The antenna can be used in vertical or horizontal polarization, useful when matching the broadcast system polarization or comparing both during surveys.
What connector and max power does it support?
Nf connector and 300 W max power, with 50 Ω nominal impedance.
What documentation is included for professional reporting?
A complete manual can include internal calibration with typical gain factor, datasheet, certificate of conformity (with serial number), H/V radiation patterns,
return loss test report, K-factor calculation and assembly instructions.
Related topics and searches
Typical queries and applications related to ARL470F700XS and similar Protel measurement antennas:
DVB-T measurement antenna 470–700 MHz ITU-R television planning UHF antenna UHF log periodic measurement antenna field strength survey antenna UHF TV coverage mapping DVB-T DVB-T2 interference hunting antenna UHF direction finding antenna for broadcasting EMC UHF measurement antenna Nf connector 50 ohm measurement antenna return loss VSWR test report antennaVISIT "ANTENNAKIT" – BEST QUALITY – LOWER PRICE – CLICK BELOW
https://www.antennaskit.com/