ARO213XZ ARO213IRXZ Omnidirectional Measurements antennas 87.5-108MHz
MONITORING ANTENNAS FOR MOBILE AND STATIONARY USE, PROVIDING COMPLETE COVERAGE RANGE 87.5 MHz TO 108 MHz
MOD. ARO213XZ – COD. ARO213XZ
MOD. ARO213IRXZ – COD. ARO213IRXZ
MOD. ARO213XZ – COD. ARO213XZ
MOD. ARO213IRXZ – COD. ARO213IRXZ
Complete manual including:
• Internal calibration with typical gain factor
• Datasheet with general product characteristics
• Certificate of Conformity including the product serial number
• H/V radiation patterns
• Return loss test report
• K-factor calculation
• Assembly instructions
• Internal calibration with typical gain factor
• Datasheet with general product characteristics
• Certificate of Conformity including the product serial number
• H/V radiation patterns
• Return loss test report
• K-factor calculation
• Assembly instructions
ELECTRICAL DATA
Frequency range A MHz 87.5÷108
Bandwidth MHz 20.5
Gain max . dBi 2.2
Return loss dB 87.5-108 Mhz ≥ -12
Return loss dB 90 - 104 Mhz ≥ -14
Nominal impedance Ω 50
Polarization Ω V
H beamwidth 98 Mhz -3 dB 360°
E beamwidth 98 Mhz -3 dB 90°
Max Power W 500 W
Connector Nf
Lightning protection All metal parts are D.C. grounded
MECHANICAL DATA
Dimension length mm 750XØ130
Elements numbers 4
Weight without clamp kg 1.9
Wind surface m² 0.05
Front wind load Kg 2.1 ( 25 m/s )
Mounting mm Ø 30
MATERIALS
Anticorodal alluminium - Brass - Teflon - Polyvinyl chloride - RoHS compliance
ACCESSORIES
SUPIS01 Isolation fiberglass pole Ø 35 x 1000
BAG213xz Transport bag
ORDERING AND PACKAGING INFORMATIONS
ARO213XZ With unscrewed elements
ARO213IRXZ With folding elements
PACKAGING mm. 900x150x150 / weight 3 Kg without clamps
Frequency range A MHz 87.5÷108
Bandwidth MHz 20.5
Gain max . dBi 2.2
Return loss dB 87.5-108 Mhz ≥ -12
Return loss dB 90 - 104 Mhz ≥ -14
Nominal impedance Ω 50
Polarization Ω V
H beamwidth 98 Mhz -3 dB 360°
E beamwidth 98 Mhz -3 dB 90°
Max Power W 500 W
Connector Nf
Lightning protection All metal parts are D.C. grounded
MECHANICAL DATA
Dimension length mm 750XØ130
Elements numbers 4
Weight without clamp kg 1.9
Wind surface m² 0.05
Front wind load Kg 2.1 ( 25 m/s )
Mounting mm Ø 30
MATERIALS
Anticorodal alluminium - Brass - Teflon - Polyvinyl chloride - RoHS compliance
ACCESSORIES
SUPIS01 Isolation fiberglass pole Ø 35 x 1000
BAG213xz Transport bag
ORDERING AND PACKAGING INFORMATIONS
ARO213XZ With unscrewed elements
ARO213IRXZ With folding elements
PACKAGING mm. 900x150x150 / weight 3 Kg without clamps
Omnidirectional broadband measurement antenna for the FM broadcast band (87.5–108 MHz), designed for radiomonitoring and for monitoring-and-measurement activities where a 360° horizontal coverage pattern is required.
The 87.5–108 MHz range corresponds to FM radio services (Band II), so typical applications include transmitter monitoring, RDS checks, field-strength/coverage surveys and the identification of unwanted emissions or interfering signals inside the FM spectrum.
For deployment and logistics, two supply configurations are available: ARO213XZ with unscrewed elements and ARO213IRXZ with folding elements, supporting both fixed monitoring sites/control centers and mobile missions. Lightning protection is supported by D.C. grounding of all metal parts as specified.
Radiomonitoring
RF Signal Survey
Monitoring and measurement of RF signals
Antenna designed and manufactured in Italy.
For deployment and logistics, two supply configurations are available: ARO213XZ with unscrewed elements and ARO213IRXZ with folding elements, supporting both fixed monitoring sites/control centers and mobile missions. Lightning protection is supported by D.C. grounding of all metal parts as specified.
Radiomonitoring
RF Signal Survey
Monitoring and measurement of RF signals
Antenna designed and manufactured in Italy.
Frequently asked questions about ARO213XZ / ARO213IRXZ
Quick answers for FM radiomonitoring teams, mobile survey units and fixed monitoring stations working across 87.5-108 MHz.
What is the ARO213XZ / ARO213IRXZ used for?
An omnidirectional broadband measurement antenna for the FM broadcast band (87.5–108 MHz), used for radiomonitoring, RF signal surveys and measurement reporting in Band II.
Which services fall inside 87.5–108 MHz?
This range corresponds to FM broadcasting (Band II). Typical monitoring tasks include transmitter checks, field-strength/coverage surveys, RDS verification and identification of unwanted signals within the FM spectrum.
What is the difference between ARO213XZ and ARO213IRXZ?
ARO213XZ is supplied with unscrewed elements. ARO213IRXZ is supplied with folding elements, useful when transport bulk reduction is a priority.
Is it suitable for mobile vehicles and fixed monitoring sites?
Yes. It fits vehicle-based FM monitoring missions and fixed monitoring/control centers that require omnidirectional measurements in the FM band.
What polarization does it support?
The antenna is specified for vertical polarization, matching typical FM broadcast monitoring setups.
Is documentation available to support professional reports?
Yes. The supplied documentation package can include calibration references, radiation patterns, return loss reporting, K-factor calculation and assembly instructions to support repeatability and reporting.
Related topics and searches
Typical queries and applications related to the ARO213XZ / ARO213IRXZ and similar Protel measurement antennas:
omnidirectional FM measurement antenna 87.5-108 MHz FM ground plane monitoring antenna Band II field strength survey antenna FM transmitter monitoring and RDS checks RF signal survey antenna for control centers mobile FM radiomonitoring vehicle antenna vertical polarization FM measurement antenna N female connector FM antenna folding elements antenna for transport unscrewed elements antenna packing return loss 87.5-108 MHz measurement antenna D.C. grounded lightning protection antennaVISIT "ANTENNAKIT" – BEST QUALITY – LOWER PRICE – CLICK BELOW
https://www.antennaskit.com/