ARYCKM-D-25X Protel NARROW-BAND VHF Directional Yagi 2 elements Antenna 150-300 MHz
VHF ANTENNA
MOD. ARYCKM-D-25X
MOD. ARYCKM-D-25X
Narrow-band 2-Element Directional Yagi antenna for 150–300 MHz, designed for professional VHF installations where a controlled directional pattern is required to optimize coverage and reduce unwanted signals. With its narrow-band design (10 MHz bandwidth), the antenna is ideal for frequency-selective deployments such as VHF communications, site and spectrum monitoring, radiomonitoring, and interference hunting, including applications in telemetry/SCADA, paging, land mobile VHF networks, railway/trackside communications, and Band III monitoring within the 150–300 MHz range.
Engineered for severe climatic conditions and continuous outdoor service, it features a stainless-steel support with a radiant dipole available in aluminium or stainless steel (depending on version). The hot-dip galvanised mast clamp with stainless-steel hardware ensures robust mounting on masts and structures. All metal parts are D.C. grounded to improve lightning behaviour and long-term reliability. Supplied with N-f connector and rated up to 700 W. Designed and manufactured in Italy.
Also available for bands:
108–150 MHz
/
300–600 MHz
ELECTRICAL DATA (TYP.)
Frequency range MHz 150 ÷ 300
Bandwidth MHz 10
Gain max. dBi 7.2
Return loss dB ≥ -14
VSWR ≤ 1.5:1
Nominal impedance Ω 50
Polarization V/H
H beamwidth typ. -3 dB 130°
E beamwidth typ. -3 dB 70°
Max Power W 700
Connector Nf
Lightning protection All metal parts are D.C. grounded
MECHANICAL DATA (TYP.)
Dimension length mm 1100 x 1000 x 100
Weight without clamp kg 0.9
Wind surface m² Front 0.03 side 0.08
Front wind load Kg 5.9 (160 Km/h)
Side wind load Kg 12.8 (160 Km/h)
Mounting mm Ø 35 ÷ 114
MATERIALS
Stainless steel – Teflon – Brass – Aluminium 6060
ACCESSORIES
RAD150300 RADOME Polyvinyl chloride
ZAFZ25/114C CLAMP hot-dip galvanizing Weight 1.9 Kg
ORDERING AND PACKAGING INFORMATIONS
ARYCKM-D-25XA ALLUMINIUM DIPOLE *
ARYCKM-D-25XI STAINLESS STEEL DIPOLE
TYP. PACKAGING cm. 100 x 19 x 19 / Total weight with clamp 3.1 Kg
Frequently asked questions about ARYCKM-D-25X
Common questions about the ARYCKM-D-25X narrow-band 2-element directional VHF Yagi antenna (150–300 MHz):
What is the ARYCKM-D-25X typically used for?
It is used in professional VHF installations where a directional pattern helps control coverage and reduce unwanted signals, including monitoring, radiomonitoring and interference hunting, as well as frequency-selective VHF communication links within the 150–300 MHz range.
What are the main electrical characteristics?
Typical data: 150–300 MHz frequency range with 10 MHz bandwidth, up to 7.2 dBi max gain,
50 ohm nominal impedance, V/H polarization, VSWR ≤ 1.5:1 and return loss ≥ -14 dB.
Typical beamwidths are 130° (H-plane) and 70° (E-plane).
Which connector and power handling are supported?
The antenna is supplied with N-f connector and is rated up to 700 W (typ.).
Is it suitable for harsh outdoor environments?
Yes. The structure uses stainless-steel support and all metal parts are D.C. grounded to improve lightning behaviour.
A RAD150300 radome (PVC) is available as an accessory for additional protection.
Where is the antenna designed and manufactured?
The ARYCKM-D-25X is designed and manufactured in Italy.
Related topics and searches
Typical queries and applications related to the ARYCKM-D-25X and similar Protel VHF directional antennas:
VHF Yagi antenna 150-300 MHz
2-element VHF directional antenna
Narrow-band VHF Yagi 10 MHz BW
VHF spectrum monitoring antenna
Radiomonitoring / RF signal survey
Interference hunting VHF antenna
Band III monitoring antenna
VHF base station directional antenna
Land mobile VHF antenna
Telemetry / SCADA VHF antenna
Paging VHF antenna
D.C. grounded lightning protection
RAD150300 radome accessory
ZAFZ25/114C mast clamp 35-114 mm
N-f 700 W VHF antenna
VISIT "ANTENNAKIT" – BEST QUALITY – LOWER PRICE – CLICK BELOW