Go to content

ARYCKM-E-48X Narrow-band UHF 4-element Yagi directional antenna 300-600 MHz - Protel Antennas - Professional Antennas for Telecomunications

Protel Antennas 38 years - 2026
Logo Protel antennas
PROFESSIONAL ANTENNAS
FOR TELECOMMUNICATIONS
SELECT THE FREQUENCY BAND
Skip menu
SELECT THE FREQUENCY BAND
Skip menu

ARYCKM-E-48X Narrow-band UHF 4-element Yagi directional antenna 300-600 MHz

UHF NARROW-BAND DIRECTIONAL ANTENNA

MOD. ARYCKM-E-48X - Narrow-band 4-element Yagi antenna tuned on request within the 300-600 MHz range (typical 30 MHz bandwidth), designed for professional outdoor sites where coverage must be controlled and stable over time.

The directional pattern helps reduce unwanted signals and improves link performance in demanding UHF deployments such as LMR/PMR base stations, DMR, TETRA infrastructures, utilities, SCADA and telemetry networks.

Built for severe climatic conditions with robust mechanical structure and all-metal D.C. grounding for improved lightning protection. An optional radome can be supplied to protect the adaptor area when required by the installation environment.

ARYCKM-E-48X <br />directional antenna yagi 4 elements UHF 300-600MHz PROTEL
ELECTRICAL DATA
Frequency range (MHz): 300 ÷ 600
Bandwidth (MHz): 30
Gain max. (dBi): 10.2
Return loss (dB): ≥ -14
VSWR: ≤ 1.5:1
Nominal impedance (Ω): 50
Polarization: V/H
H beamwidth typ. -3 dB: 75°
E beamwidth typ. -3 dB: 55°
Max Power (W): 500
Connector: Nf
Lightning protection: All metal parts are D.C. grounded
MECHANICAL DATA
Dimension length typ. (mm): 500X1000x100
Weight without clamp (kg): 1
Wind surface typ. (m²): Front 0.025 side 0.08
Front wind load typ. (Kg): 3.5 (160 Km/h)
Side wind load typ. (Kg): 16.5 (160 Km/h)
Mounting (mm): Ø 35 ÷ 114
MATERIALS
Stainless steel – Teflon – Brass – Aluminium 6060
ACCESSORIES
RAD30600: RADOME - Polyvinyl chloride
ZAF225/114C: CLAMP hot-dip galvanizing - Weight 1.9 Kg
ORDERING AND PACKAGING INFORMATIONS
ARYCKM-E-48XA: ALUMINIUM DIPOLE ELEMENTS
ARYCKM-E-48XI: STAINLESS STEEL DIPOLE AND ELEMENTS
TYP. PACKAGING: cm.1000x180x180 / Total weight with clamp 3.5 Kg
Also available for bands: 108-150MHz / 150-300MHz

With a high directional gain and clean radiation pattern, the ARYCKM-E-48X is recommended when you need to concentrate coverage on a specific area, improve receive performance and limit adjacent-channel interference. The antenna is supplied with professional-grade mounting hardware for fast and secure mast installation.

Two construction options are available depending on the site requirements: aluminium dipole elements or stainless-steel dipole and elements. This makes the antenna suitable for long-term outdoor use in harsh environments.

Antenna designed and manufactured in Italy.

Protel Antennas - Made in Italy

Frequently asked questions about ARYCKM-E-48X

Answers to the most common questions for planning and installing the ARYCKM-E-48X narrow-band UHF directional Yagi antenna in professional radio sites.

Is the ARYCKM-E-48X a broadband antenna?
No. It is a narrow-band antenna tuned on request within 300-600 MHz. Typical bandwidth is 30 MHz, ideal when you want higher selectivity and controlled performance around the working channel block.
Which services typically use this type of UHF Yagi antenna?
Professional UHF infrastructures such as LMR/PMR base stations, DMR and TETRA sites, utilities, SCADA and telemetry links. The directional pattern helps focus coverage and reduce unwanted signals.
What polarization can be supplied?
The antenna is available in V/H polarization. If you have a specific site requirement, indicate it at order stage so the antenna is supplied in the correct configuration.
How does the antenna handle lightning protection?
All metal parts are D.C. grounded. This improves lightning protection and helps mitigate electrostatic discharge in outdoor installations, protecting connected radio equipment.
Can I protect the adaptor area with a radome?
Yes. A dedicated radome accessory is available when the installation environment requires extra protection of the adaptor area (weather, dirt, mechanical impacts).
Which construction option should I choose (aluminium or stainless steel)?
Aluminium elements are a strong and efficient solution for standard outdoor sites. Stainless-steel dipole and elements are recommended for the harshest environments and long-life installations where maximum corrosion resistance is required.

Related topics and searches

Typical queries and applications related to the ARYCKM-E-48X and similar Protel UHF narrow-band directional antennas:

narrow-band UHF Yagi antenna 4-element directional antenna UHF 300-600 MHz tuned antenna LMR / PMR base station antenna DMR UHF directional antenna TETRA site antenna public safety UHF antenna utility radio antenna SCADA telemetry UHF antenna interference rejection antenna DC grounded lightning protection stainless steel outdoor antenna optional radome accessory N female 500 W antenna
VISIT "ANTENNAKIT" - BEST QUALITY - LOWER PRICE - CLICK BELOW
CONTACT
COMPANY
NEW
OTHER APPLICATIONS
PROTEL Antennas Via Magellano 3 A/B 6
20090 CESANO BOSCONE (MILANO) ITALY
Phone+39.02.48600265 Fax+39.02.48600871
P.I. 09497700154 REA 126350
Copyright PROTEL
1988-2026 All Rights Reserved
Back to content