Go to content

Band-Pass double cavity filter FM 87.5 - 108 MHz Protel - Protel Antennas - Professional Antennas for Telecomunications

Protel Antennas 38 years - 2026
Logo Protel antennas
PROFESSIONAL ANTENNAS
FOR TELECOMMUNICATIONS
SELECT THE FREQUENCY BAND
Skip menu
SELECT THE FREQUENCY BAND
Skip menu

Band-Pass double cavity filter FM 87.5 - 108 MHz Protel

The Protel FC2 series includes double resonant cavity band-pass filters engineered for FM broadcast (87.5-108 MHz). They are typically used in co-site transmitter stations to reduce intermodulation products that can occur when several transmitters operate close to each other, and in reception chains to improve adjacent-channel protection.
Filters are factory tuned at the band centre or to customer specifications. Each unit is delivered with the instruction handbook and the related performance curves, supporting professional broadcast maintenance and commissioning workflows.
Band-Pass in Double Cavity Filters 87.5-108 MHz

Professional RF filtering for FM broadcast transmitter sites, designed to improve channel cleanliness, site stability and co-site performance in Band II installations.


Band-Pass double cavity filter FM 87.5 - 108 MHz
SPECIFICATIONS FC2 50 FC2 1W FC2 3W FC2 5W
Frequency range 87.5-108 MHz 87.5-108 MHz 87.5-108 MHz 87.5-108 MHz
Characteristic impedance 50 ohm 50 ohm 50 ohm 50 ohm
Max power handling capacity 50 W 1 kW 2 kW 5 kW
VSWR <= 1.05 <= 1.05 <= 1.05 <= 1.05
Insertion loss -0.85 dB -0.5 dB -0.5 dB -0.5 dB
Bandwidth -3 dB 2177 kHz 760 kHz 760 kHz 760 kHz
Connectors N female 7/16 - N female 7/8 1+5/8
Colour grey grey grey grey
Nominal temperature range -10 to +50 C -10 to +50 C -10 to +50 C -10 to +50 C
Weight 7 kg 25 kg 29 kg 50 kg

On mobile, swipe horizontally to view the full table.

Protel Antennas - Made in Italy

Frequently asked questions about FC2 band-pass double cavity filters

Some common questions about Protel double resonant cavity band-pass filters for FM broadcast (87.5-108 MHz):

For which applications are these cavity filters typically used?
They are used in FM transmitter sites to reduce intermodulation products when several transmitters operate in the same location, and in reception chains to improve adjacent-channel protection.
What are the main RF characteristics?
The FC2 series covers 87.5-108 MHz with 50 ohm impedance, very low VSWR <= 1.05 and low insertion loss (typ. -0.85 dB for FC2 50 and -0.5 dB for higher power models).
How are the filters tuned and supplied?
Units are factory tuned at band centre or to customer specifications. Each filter is supplied with the instruction handbook and the related performance curves.
Which models and power ratings are available?
Available versions include FC2 50 (50 W), FC2 1W (1 kW), FC2 3W (2 kW) and FC2 5W (5 kW), with connectors selected according to the power class (from N female up to 1+5/8).

Related topics and searches

Typical queries and applications related to Protel FC2 band-pass cavity filters and similar FM broadcast RF components:

FM band-pass cavity filter 87.5-108 MHz Double resonant cavity filter for FM sites Intermodulation reduction in co-site transmitters Adjacent channel protection FM receiver RF filtering for multichannel FM mixers 50 ohm cavity filter VSWR 1.05 High power FM filtering 1 kW 2 kW 5 kW

VISIT "ANTENNAKIT" - BEST QUALITY - LOWER PRICE - CLICK BELOW

www.antennaskit.com

CONTACT
COMPANY
NEW
OTHER APPLICATIONS
PROTEL Antennas Via Magellano 3 A/B 6
20090 CESANO BOSCONE (MILANO) ITALY
Phone+39.02.48600265 Fax+39.02.48600871
P.I. 09497700154 REA 126350
Copyright PROTEL
1988-2026 All Rights Reserved
Back to content