Double Bridge Combining Filters FM 87.5÷108 MHz Protel
When FM broadcast transmitter frequencies are very close, traditional star point combining circuits are no longer suitable. In these situations, Protel Double Bridge Combining Filters provide isolation mainly through the double bridge circuit structure, supporting reliable multi-transmitter combining in the 87.5–108 MHz band.
All units are factory tuned either at the centre of the operating band or according to customer specifications. Each filter is supplied with an end user manual and the related measured working curves. Versions with 3, 4 or more inputs and special combining configurations are available on request.
Double Bridge Combining Filters FM 87.5–108 MHz are designed for professional FM broadcast sites where high isolation is required with very close channel spacing. The DDP range is available in different power classes and connector options, supporting low, medium and high power transmitter systems for co-site installations.
On mobile, swipe horizontally to view the full table.
Note: versions with 3, 4 or more inputs are available on request.
Frequently asked questions about Double Bridge Combining Filters (DDP series)
Some common questions about Protel double bridge combining filters for FM broadcast sites in the 87.5-108 MHz band:
When are double bridge combining filters used instead of star point circuits?
They are used when the transmitter frequencies are very close and star point combining is no longer suitable.
In these conditions, the isolation between transmitters is mainly achieved by the double bridge circuit structure.
Are the DDP combining filters tuned to the operating frequencies?
Yes. Units are factory tuned either at the centre of the operating band or according to
customer specifications. Each filter is supplied with an end user manual
and the related working curves.
What are the key electrical specifications for FM broadcast applications?
The DDP series covers 87.5-108 MHz with 50 ohm characteristic impedance.
Typical VSWR is <= 1.3 on the broadband input and <= 1.05 on the narrowband input.
Depending on model and spacing, isolation is typically > 30 dB at 1 MHz and up to > 40 dB.
Can Protel supply versions with more than two inputs?
Yes. On request, Protel supplies mixers with 3, 4 or more inputs and dedicated combining
configurations for low, medium and high power FM broadcast sites.
Related topics and searches
Typical queries and applications related to the Double Bridge Combining Filters (DDP series) and similar Protel FM broadcast R.F. components:
FM combiner diplexer 87.5-108 MHz
Double bridge FM combining filter
High isolation combiner for close frequencies
Co-site FM transmitter combining
FM broadcast station RF filters and combiners
N / 7-16 / 7-8 / 1+5-8 RF connectors
DDP 100 DDP 1W DDP 2W DDP 5W
VISIT "ANTENNAKIT" - BEST QUALITY - LOWER PRICE - CLICK BELOW