Go to content

HF antennas 2–87 MHz for professional communications - Protel Antennas - Professional Antennas for Telecomunications

Protel Antennas 38 years - 2026
Logo Protel antennas
PROFESSIONAL ANTENNAS
FOR TELECOMMUNICATIONS
SELECT THE FREQUENCY BAND
Skip menu
SELECT THE FREQUENCY BAND
Skip menu

HF antennas 2–87 MHz for professional communications

Role of 2–87 MHz HF/VHF low band in professional communications

The 2–87 MHz frequency range covers the classic HF spectrum and the lower part of the VHF band. These frequencies are used for long-range communications, regional coverage and robust links in challenging environments. Depending on the frequency and propagation mode, they support ground-wave, skywave and NVIS communication paths, allowing reliable links over tens, hundreds or even thousands of kilometres, with moderate transmit power levels.

Professional 2–87 MHz antennas must therefore combine wide operating bandwidth, mechanical robustness and repeatable electrical performance over time. Typical applications include fixed HF base stations, emergency and civil defence networks, military and governmental systems, monitoring and radiomonitoring stations, as well as industrial and utility communication links in the lower VHF band.

Typical antenna types in the 2–87 MHz range

In this band Protel designs and manufactures several families of professional antennas, based on different radiating structures and geometries:

  • HF dipole antennas for fixed stations, monitoring and broadcast-type applications. Dipoles offer a well-known radiation pattern and can be installed in different configurations (horizontal, inverted-V, sloping) according to the required coverage and available space.
  • Directional yagi antennas for focused coverage and point-to-point links. Yagi arrays provide gain and a narrow main lobe, improving the signal-to-noise ratio and reducing unwanted radiation in other directions.
  • Log-periodic antennas for wideband operation from HF up to the lower VHF region. Log-periodic structures ensure a controlled impedance and radiation pattern over a large frequency span, making them ideal for monitoring, surveillance, test sites and multi-service installations.

Depending on the application, these antennas can be supplied with different mechanical configurations, mounting hardware and materials (for example stainless steel and aluminium), optimised for long-term outdoor use and for installation on towers, masts and dedicated structures.

Applications: long-range, NVIS and monitoring

One of the key advantages of the 2–30 MHz HF region is the possibility of establishing long-distance links using skywave propagation through the ionosphere. Combined with appropriate modulation and coding schemes, suitable antennas in this band provide reliable communication even when other infrastructure-based systems are not available.

In the 4–12 MHz portion, NVIS (Near Vertical Incidence Skywave) techniques are often used to cover intermediate ranges, where conventional ground-wave or low-angle skywave paths leave coverage gaps. Correct antenna selection and installation (height, tilt, orientation) are essential to obtain the desired radiation pattern and field strength over the target area.

Above 30 MHz and up to 87 MHz, the lower VHF band is suitable for regional coverage, wide-area networks and specific professional services. Directional and omnidirectional antennas in this portion of the band are used for base stations, relay sites and monitoring facilities, with solutions optimised for both fixed and transportable installations.

Integration with RF components, filters and systems

Professional 2–87 MHz systems frequently include RF filters, combiners and matching networks to share antennas between multiple transmitters, receivers or services. For this reason, the electrical characteristics of the antenna (impedance, return loss, VSWR, power handling) must be stable and well controlled across the specified frequency range.

Protel HF antennas are designed with this system-level perspective: gain, beamwidth and polarisation are defined to match the required coverage; mechanical design and materials are selected to withstand severe climatic conditions; the RF interface and mounting solutions are engineered to integrate smoothly with the rest of the site equipment.

How to select the right HF antenna for 2–87 MHz

The selection of a 2–87 MHz antenna depends on several factors: required coverage distance, propagation mode (ground-wave, skywave, NVIS), installation site geometry, available mast height and mechanical constraints. Directional yagi or log-periodic antennas are recommended when it is necessary to concentrate the radiated energy in a specific azimuth direction, for example towards a remote station or along a defined corridor. Dipole-based solutions are suitable for general-purpose base stations, monitoring and wide-area coverage.

By combining different antenna types, polarisation options and mechanical configurations, it is possible to design HF/VHF low band systems that deliver reliable communication in critical scenarios such as emergency operations, defence, civil protection and industrial networks. The 2–87 MHz family of Protel antennas offers the flexibility needed to build these systems, ensuring consistent performance and long-term reliability in professional environments.

For the list of available models and detailed electrical and mechanical specifications, please refer to the HF antennas 2–87 MHz product catalogue page .


CONTACT
COMPANY
NEW
OTHER APPLICATIONS
PROTEL Antennas Via Magellano 3 A/B 6
20090 CESANO BOSCONE (MILANO) ITALY
Phone+39.02.48600265 Fax+39.02.48600871
P.I. 09497700154 REA 126350
Copyright PROTEL
1988-2026 All Rights Reserved
Back to content