Go to content

MI689 Combining Filter GSM-DCS-UMTS-LTE 780-960 / 1710-2170 MHz - Protel Antennas - Professional Antennas for Telecomunications

Protel Antennas 38 years - 2026
Logo Protel antennas
PROFESSIONAL ANTENNAS
FOR TELECOMMUNICATIONS
SELECT THE FREQUENCY BAND
Skip menu
SELECT THE FREQUENCY BAND
Skip menu

MI689 Combining Filter GSM-DCS-UMTS-LTE 780-960 / 1710-2170 MHz

GSM/DCS/UMTS/LTE COMBINING FILTER FOR 780-960 AND 1710-2170 MHz

MI689
780÷960 / 1710÷2170MHz

MI689 COMBINING FILTERS   GSM-DCS-UMTS 780-960MHz  1710-2170MHz
SPECIFICATIONS MI689
Frequency range MHz 780÷960 / 1710÷2170
Characteristic impedance 50 ohm
Max power handling capacity 200 W
VSWR max <1.3
Isolation >70 dB
Insertion loss <-0.5 dB
Input Connectors 7/16 female
Output Connectors 7/16 female
Nominal temperature range -25 to +55 C
Weight 1 Kg
Dimension (mm) 200 x 150 x 30

The MI689 is a professional combining filter engineered for mobile-radio frequency systems where two service ranges must share the same antenna line. It is designed for the mobile telephony ecosystem and helps simplify RF architectures by reducing feeder runs, limiting the need for additional cabling and supporting cleaner multi-service deployments.

In the 780-960 MHz range the system typically hosts services such as LTE/4G and 5G low bands as well as GSM 900 (depending on the network plan), while the 1710-2170 MHz range commonly covers DCS/LTE 1800 and UMTS/LTE 2100. This makes MI689 a practical choice for multi-operator and multi-technology sites where compactness, robustness and RF performance must coexist.

The key advantages of MI689 are its very good linearity and high isolation, together with a low return-loss behavior, supporting stable RF operation when different services share the same distribution path. The mechanical compactness also helps installation inside cabinets, head-ends and technical rooms where space and orderly cabling are critical.

Typical applications include base station and site combining, DAS and in-building coverage, repeaters/BDA architectures, and infrastructure projects such as road tunnels, motorway tunnels, railway tunnels, metro tunnels, stations, underground passages and utility tunnels, where combining bands can simplify the system layout and reduce installation complexity.

Prodotto designed and manufactured in Italy.

Protel Antennas - Made in Italy

Frequently asked questions about MI689 Combining Filter

Quick answers for selecting combining filters in GSM, DCS, UMTS, LTE 4G and 5G distribution systems, including DAS, repeaters and tunnel infrastructures.

What is MI689 used for in an RF system?
MI689 is used to combine two frequency ranges on the same antenna line, simplifying the RF layout and reducing the need for additional feeder cables in multi-service mobile networks.
Which services are typically handled in these frequency ranges?
Depending on the deployment, the 780-960 MHz range is commonly used for LTE/4G and 5G low bands and GSM 900, while 1710-2170 MHz typically covers DCS/LTE 1800 and UMTS/LTE 2100 services.
Is MI689 suitable for DAS, repeaters and tunnel coverage installations?
Yes. Combining filters are widely used in DAS and repeater/BDA systems, including road, railway and metro tunnel infrastructures, to merge bands and optimize head-end and cabinet layouts.
Why are isolation and linearity important in a combining filter?
Isolation limits unwanted coupling between services, while good linearity supports clean behavior when multiple carriers and technologies share the same RF path.
What should I verify before ordering a combining filter?
Verify the exact operating bands required, the expected power levels, the connector interfaces, and the environmental conditions. If multiple operators share the system, confirm isolation and insertion loss targets for your network plan.

Related topics and searches

Typical queries and applications related to the MI689 and similar Protel combining filters:

MI689 combining filter RF combiner 780-960 1710-2170 GSM DCS UMTS LTE band combiner DAS combining filter Repeater BDA RF filter Tunnel radio coverage components 7/16 RF connectors filter High isolation combining filter
VISIT "ANTENNAKIT" - BEST QUALITY - LOWER PRICE - CLICK BELOW
https://www.antennaskit.com/
CONTACT
COMPANY
NEW
OTHER APPLICATIONS
PROTEL Antennas Via Magellano 3 A/B 6
20090 CESANO BOSCONE (MILANO) ITALY
Phone+39.02.48600265 Fax+39.02.48600871
P.I. 09497700154 REA 126350
Copyright PROTEL
1988-2026 All Rights Reserved
Back to content