Go to content

RIP2N RIP3N RIP4N splitters 50-800MHz for medium and high power - Protel Antennas - Professional Antennas for Telecomunications

Protel Antennas 38 years - 2026
Logo Protel antennas
PROFESSIONAL ANTENNAS
FOR TELECOMMUNICATIONS
SELECT THE FREQUENCY BAND
Skip menu
SELECT THE FREQUENCY BAND
Skip menu

RIP2N RIP3N RIP4N splitters 50-800MHz for medium and high power

Tuned RF splitters for medium and high power antenna distribution in the 50–800 MHz band. Sturdy and easy to install, the RIP2N, RIP3N and RIP4N units are designed for professional broadcast and land mobile radio systems, with 2, 3 or 4 outputs. They can be used as antenna combiners or distribution splitters in FM/TV networks, public-safety and utility radio, tunnel and DAS coverage and other critical RF infrastructures, both indoor and outdoor.

MOD. RIP2N - RIP3N - RIP4N

RIP2N - RIP3N - RIP4N splitters 50 - 800 MHz for medium and high power antenna’s distribution Protel
ELECTRICAL DATA
Frequency range MHz 50÷800
Bandwidth range 2 way MHz 10% central frequency
Bandwidth range 3-4 way MHz 5% central frequency
VSWR ≤1.5
Nominal impedance Ω 50
Temperature °C -30°/+60°
Max Power W 300
Connector N
MECHANICAL DATA
Dimension section mm 40 x 40
Dimension length Depending on frequencies
Color Alodine 1200
MATERIALS
Aluminium – Teflon – Brass – Stainless steel
MODEL & ORDERING INFORMATION
RIP2 N 2 WAY
RIP3 N 3 WAY
RIP4 N 4 WAY


Protel Antennas - Made in Italy

Frequently asked questions about RIP2N–RIP4N splitters

Some common questions about the RIP2N, RIP3N and RIP4N tuned RF splitters 50–800 MHz:

For which applications are the RIP2N, RIP3N and RIP4N splitters used?
RIP2N, RIP3N and RIP4N are tuned RF splitters for medium and high power antenna distribution in the 50–800 MHz band. They are typically used in FM and TV broadcast networks, professional and land mobile radio systems, public-safety and emergency services, utility and industrial radio, as well as tunnel coverage, DAS and indoor distribution systems.
What electrical performance do these splitters provide?
The splitters cover 50–800 MHz with tuned bandwidths of about 10% of the central frequency for 2-way models and 5% for 3-way and 4-way models. They feature 50 ohm nominal impedance, VSWR ≤ 1.5, maximum power 300 W, N connectors and an operating temperature range of -30°/+60 °C.
Are RIP2N–RIP4N suitable for outdoor installation?
Yes. These models are described as sturdy and easy to install and are suitable for outdoor use. Their mechanical design and materials (aluminium, brass, stainless steel) allow installation on towers, poles, walls or in outdoor cabinets at broadcast and communication sites.
How do I choose between RIP2N, RIP3N and RIP4N?
The choice depends mainly on the number of RF branches you need. The RIP2N is a 2-way splitter, the RIP3N is a 3-way splitter, and the RIP4N is a 4-way splitter. All share the same 50–800 MHz range, 50 ohm impedance and 300 W maximum power, so you can select the model according to the required number of antennas or distribution lines in your system.

Related topics and searches

Typical queries and applications related to the RIP2N–RIP4N tuned RF splitters:

50–800 MHz RF power splitter tuned narrow band antenna splitters medium and high power antenna distribution FM / TV broadcast RF combiners VHF UHF splitters for public-safety radio RF splitters for tunnel and DAS coverage Protel filters and RF components 2–87 MHz

VISIT "ANTENNAKIT" – BEST QUALITY – LOWER PRICE – CLICK BELOW

www.antennaskit.com

CONTACT
COMPANY
NEW
OTHER APPLICATIONS
PROTEL Antennas Via Magellano 3 A/B 6
20090 CESANO BOSCONE (MILANO) ITALY
Phone+39.02.48600265 Fax+39.02.48600871
P.I. 09497700154 REA 126350
Copyright PROTEL
1988-2026 All Rights Reserved
Back to content