Go to content

Splitters 2-3-4 WAY 108-300 MHz for antenna’s distribution - Protel Antennas - Professional Antennas for Telecomunications

Protel Antennas 38 years - 2026
Logo Protel antennas
PROFESSIONAL ANTENNAS
FOR TELECOMMUNICATIONS
SELECT THE FREQUENCY BAND
Skip menu
SELECT THE FREQUENCY BAND
Skip menu

Splitters 2-3-4 WAY 108-300 MHz for antenna’s distribution

MOD. RIP2N - RIP3N - RIP4N
Tuned splitters studied for medium and high power antenna distribution networks.

Developed for professional RF infrastructures where a robust and repeatable split is required, these tuned splitters support clean distribution in multi-antenna systems and station architectures. Their sturdy construction and practical mounting make them suitable for installations that need reliability over time.

Antenna designed and manufactured in Italy.

Splitters 2-3-4 WAY 50 - 800 MHz for medium and high power antenna’s distribution Protel
ELECTRICAL DATA
Frequency range (MHz): 50-800
Bandwidth range 2 way (MHz): 10% central frequency
Bandwidth range 3-4 way (MHz): 5% central frequency
VSWR: <= 1.5
Nominal impedance: 50 Ohm
Temperature (°C): -30/+60
Max power (W): 300
Connector: N
MECHANICAL DATA
Dimension section (mm): 40 x 40
Dimension length: Depending on frequencies
Color: Alodine 1200
MATERIALS
Aluminium - Teflon - Brass - Stainless steel
MODEL & ORDERING INFORMATION
RIP2 N: 2 WAY
RIP3 N: 3 WAY
RIP4 N: 4 WAY

The RIP series is intended for RF distribution in sites where multiple antenna lines must be fed with controlled impedance and low mismatch, helping to keep a stable match across the operating window around the chosen central frequency.

Typical applications include RF station infrastructures, multi-antenna broadcast/telecom layouts, coverage systems and professional networks where outdoor-ready passive components are required.

Available as 2-way, 3-way and 4-way tuned splitters with N connectors, designed for straightforward deployment in medium/high-power distribution chains.

Protel Antennas - Made in Italy

Frequently asked questions about RIP2N / RIP3N / RIP4N

Key information about the tuned splitters RIP2N, RIP3N and RIP4N for professional RF distribution chains.

What are these tuned splitters used for?
They are used for medium and high power antenna distribution in RF networks where multiple antenna lines must be fed from a single source.
What frequency range is specified?
The specified frequency range is 50-800 MHz.
How does the bandwidth differ between 2-way and 3/4-way models?
The 2-way version is specified as 10% of the central frequency, while the 3-way and 4-way versions are specified as 5% of the central frequency.
What are the main electrical specifications?
VSWR <= 1.5, impedance 50 Ohm, max power 300 W and N connector are specified.
Are they suitable for outdoor use?
They are described as sturdy and suitable for use outside, with an operating temperature range of -30 to +60 °C.
How do I choose between RIP2N, RIP3N and RIP4N?
Choose by the number of outputs required: RIP2N = 2-way, RIP3N = 3-way, RIP4N = 4-way.

Related topics and searches

Typical queries and applications related to tuned RF splitters and antenna distribution:

RIP2N tuned 2-way splitter RIP3N tuned 3-way splitter RIP4N tuned 4-way splitter RF power divider 50-800 MHz antenna distribution splitter N connector 300 W outdoor RF splitter tuned bandwidth splitter 10% 5% passive RF components for stations VHF antenna feed network telecom broadcast RF distribution
VISIT "ANTENNAKIT" BEST QUALITY - LOWER PRICE - CLICK BELOW
CONTACT
COMPANY
NEW
OTHER APPLICATIONS
PROTEL Antennas Via Magellano 3 A/B 6
20090 CESANO BOSCONE (MILANO) ITALY
Phone+39.02.48600265 Fax+39.02.48600871
P.I. 09497700154 REA 126350
Copyright PROTEL
1988-2026 All Rights Reserved
Back to content