How do I choose between 2-way, 3-way and 4-way splitters?

Choose based on the number of RF branches required and the target distribution topology. Use 2-way for simple dual-branch distribution, 3-way for triple-sector or multi-branch layouts, and 4-way for quad distribution in head-end or repeater/DAS systems.

Are these splitters suitable for outdoor installations?

Yes. RIP2 N, RIP3 N and RIP4 N tuned splitters are designed with robust construction for outdoor use, where mechanical strength and stable RF behaviour are required.

What are the main electrical interfaces?

Typical interface is 50 ohm with N connector, designed for tuned bandwidth around the required central frequency. Refer to the technical data for the exact frequency range, VSWR and power handling.

Which networks commonly use 300-800 MHz splitters?

Typical deployments include UHF professional radio (PMR/DMR/TETRA), cellular bands around 700/800 MHz, in-building DAS, repeaters and multi-antenna distribution networks where reliable RF splitting is needed.

Splitters 2-3-4 WAY 300-800 MHz for antenna’s distribution

300 - 870 MHz

MOD. RIP2 N - RIP3 N - RIP4 N

Tuned splitters engineered for medium and high power antenna distribution in professional UHF systems. Robust and easy to install, they are suitable for outdoor deployments where stable RF behaviour and reliable mechanical construction are required.

Typical use cases include base stations, repeaters, in-building DAS head-ends and RF distribution networks for PMR/DMR/TETRA as well as cellular deployments around 700/800 MHz, where controlled splitting helps feed multiple antennas or sectors from a single RF line.

The 2-way, 3-way and 4-way versions allow the correct choice depending on the number of branches, site layout and installation constraints. For fast selection, specify the operating band and the distribution topology.

Splitters 2-3-4 WAY 300 - 800 MHz for medium and high power antenna’s distribution – Protel

ELECTRICAL DATA

Frequency range MHz: 50÷800

Bandwidth range 2 way MHz: 10% central frequency

Bandwidth range 3-4 way MHz: 5% central frequency

VSWR: ≤1.5

Nominal impedance Ohm: 50

Temperature °C: -30°/+60°

Max Power W: 300

Connector: N

MECHANICAL DATA

Dimension section mm: 40 x 40

Dimension length: Depending on frequencies

Color: Lanthane

MATERIALS

Aluminium - Teflon - Brass - Stainless steel

ACCESSORIES

Not specified in datasheet

ORDERING AND PACKAGING INFORMATIONS

RIP2 N: 2 WAY

RIP3 N: 3 WAY

RIP4 N: 4 WAY

PACKAGING

Packaging: on request

These tuned splitters are intended for professional infrastructures where consistent matching and predictable distribution are required across the planned operating channels. They are commonly integrated in multi-antenna layouts, donor/service paths for repeaters, and distribution points in UHF installations.

If you need support, provide your frequency plan, required power level and connector preferences to identify the most suitable 2-way, 3-way or 4-way configuration.

View the Filters and R.F. Components 300-870 MHz catalog

Frequently asked questions about RIP2 N / RIP3 N / RIP4 N

Key answers for selecting tuned 2-way, 3-way and 4-way splitters for professional antenna distribution networks.

What is the difference between 2-way, 3-way and 4-way splitters?

The difference is the number of output branches. Choose the version that matches your distribution topology (two, three or four antenna lines) and the site layout.

Are these splitters suitable for outdoor use?

Yes. The RIP N tuned splitters are designed with robust construction and are intended for outdoor installations in professional infrastructures.

Which networks typically use splitters in the 300-800 MHz area?

Common applications include UHF professional radio (PMR/DMR/TETRA), cellular bands around 700/800 MHz, repeaters and in-building DAS distribution networks.

Can the splitters be tuned to a specific operating band?

Yes. These are tuned splitters intended to match the operating plan around the required central frequency. Share the frequency plan to select the most suitable configuration.

Splitters 2-3-4 WAY 300-800 MHz for antenna’s distribution - Protel Antennas - Professional Antennas for Telecomunications

Splitters 2-3-4 WAY 300-800 MHz for antenna’s distribution

Frequently asked questions about RIP2 N / RIP3 N / RIP4 N

Related topics and searches