What are RIP2N, RIP3N and RIP4N used for?

RIP2N, RIP3N and RIP4N are tuned RF splitters designed for antenna distribution networks, where one RF line is divided into 2, 3 or 4 outputs for professional site installations.

Which frequency range do these tuned splitters cover?

They are designed for 50-800 MHz operation. Bandwidth depends on the number of ways: 10% of the central frequency for 2-way, and 5% of the central frequency for 3-way and 4-way models.

What are the main electrical ratings?

Typical ratings are 50 ohm nominal impedance, VSWR <= 1.5, max power 300 W, N connector, and operating temperature from -30 to +60 C.

Can they be installed outdoors?

Yes. These tuned splitters are designed with a sturdy mechanical construction and are suitable for outdoor use in professional antenna distribution systems.

Splitters 2-3-4 WAY 50-800MHz for antenna’s distribution

Q: Can they be installed outdoors?

Yes. These tuned splitters are designed with a sturdy mechanical construction and are suitable for outdoor use in professional antenna distribution systems.

Splitters 2-3-4 WAY 50-800MHz for antenna’s distribution

87.5 - 108 MHz

These tuned splitters are designed for medium and high power antenna distribution across 50-800 MHz, where stable matching and mechanical robustness are required. Available as 2-way, 3-way and 4-way versions, they are a practical solution for professional RF sites where distribution reliability and weather resistance matter.

Thanks to the tuned approach, the bandwidth is defined as a percentage of the central frequency, helping optimize performance in real installations across VHF and UHF services.

MOD. RIP2N - RIP3N - RIP4N

Professional 2-way / 3-way / 4-way tuned splitters for 50-800 MHz antenna distribution networks. Designed for sturdy installation and outdoor use, with 50 ohm nominal impedance and N connector interface.

Splitters 2-3-4 WAY 50 - 800 MHz for medium and high power antenna’s distribution Protel

Tuned splitters studied for medium and high power antenna’s distribution. Sturdy and easy to install they can be used outside.

SPECIFICATIONS	RIP2N (2 WAY)	RIP3N (3 WAY)	RIP4N (4 WAY)
Frequency range	50-800 MHz	50-800 MHz	50-800 MHz
Bandwidth range	10% of central frequency	5% of central frequency	5% of central frequency
VSWR	<= 1.5	<= 1.5	<= 1.5
Nominal impedance	50 ohm	50 ohm	50 ohm
Temperature	-30 to +60 C	-30 to +60 C	-30 to +60 C
Max power	300 W	300 W	300 W
Connector	N	N	N
Mechanical data	Section 40 x 40 mm; length depending on frequencies; color Lanthane
Materials	Aluminium - Teflon - Brass - Stainless steel
Model & ordering information	RIP2 N	RIP3 N	RIP4 N

On mobile, swipe horizontally to view the full table.

Frequently asked questions about RIP2N / RIP3N / RIP4N

Some common questions about Protel tuned splitters for 50-800 MHz antenna distribution:

What is the difference between RIP2N, RIP3N and RIP4N?

They are the same tuned splitter family with different number of outputs: 2-way (RIP2N), 3-way (RIP3N) and 4-way (RIP4N), for professional RF distribution layouts.

What frequency range and bandwidth do they support?

The tuned splitters operate from 50 to 800 MHz. Bandwidth is defined as a percentage of the central frequency: 10% for the 2-way version and 5% for the 3-way and 4-way versions.

Are they suitable for outdoor installations and medium power RF lines?

Yes. They are designed as sturdy splitters for antenna distribution and can be used outside. Electrical ratings include 50 ohm, VSWR <= 1.5 and up to 300 W with N connector interface.

Which services can be distributed in the 50-800 MHz range?

The range covers many VHF/UHF applications depending on the site, including FM broadcast, DAB, VHF/UHF land mobile (PMR/DMR, TETRA), DVB-T and other RF distribution needs within 50-800 MHz.

Splitters 2-3-4 WAY 50-800MHz for antenna’s distribution - Protel Antennas - Professional Antennas for Telecomunications

Splitters 2-3-4 WAY 50-800MHz for antenna’s distribution

Frequently asked questions about RIP2N / RIP3N / RIP4N

Related topics and searches