Go to content

UHF antennas 300–870 MHz for TETRA PMR and broadcasting services - Protel Antennas - Professional Antennas for Telecomunications

Protel Antennas 38 years - 2026
Logo Protel antennas
PROFESSIONAL ANTENNAS
FOR TELECOMMUNICATIONS
SELECT THE FREQUENCY BAND
Skip menu
SELECT THE FREQUENCY BAND
Skip menu

UHF antennas 300–870 MHz for TETRA PMR and broadcasting services

Role of the 300–870 MHz UHF band

The 300–870 MHz UHF band includes key allocations for professional radio networks and broadcasting services. In this spectrum we find TETRA and other PMR systems for public safety, utilities and transport, as well as UHF television broadcasting and various telemetry, monitoring and data applications. Antennas designed for this band must offer stable performance across wide frequency ranges, high reliability in continuous operation and radiation patterns tailored to each specific scenario.

Depending on the project, UHF antennas can be installed on rooftop masts, towers, indoor structures or tunnel walls. They must tolerate demanding environmental conditions, withstand wind and ice loads and, in multi-transmitter sites, minimise passive intermodulation products. For these reasons, professional UHF antennas combine robust mechanical design with controlled electrical behaviour over the required part of the 300–870 MHz band.

TETRA and PMR antennas in the 300–470 MHz range

TETRA, TETRAPOL and other PMR and DMR systems typically operate in the 300–470 MHz portion of the band, providing mission-critical voice and data services to public safety, transport, utilities and industrial users. Network designers require antennas that guarantee defined coverage, high availability and compatibility with base station combiners and duplexers.

Protel offers several families of UHF antennas for TETRA, TETRAPOL and PMR systems:

  • Omnidirectional ground plane and collinear antennas for uniform azimuth coverage around the site, ideal for macro and micro cells in urban and rural environments.
  • Directional panel antennas for sectorised sites, corridor coverage, tunnel portals and in-building systems, where the radiated energy must be confined to specific directions or areas.
  • Yagi and log-periodic antennas for point-to-point links, coverage of linear infrastructures and interference monitoring, providing increased gain and a narrow main lobe.

In TETRA and PMR networks, antenna selection is closely linked to frequency planning, cell layout and required overlap between sites. Gain, vertical beam shaping and front-to-back ratio are critical parameters, especially when multiple sites operate in adjacent channels or when the same antenna supports several carriers through RF combiners.

UHF broadcasting antennas in the 470–870 MHz range

The upper part of the 300–870 MHz UHF band is historically associated with television broadcasting and, in many regions, with digital terrestrial TV services such as DVB-T and DVB-T2. Antennas for these applications must provide defined azimuth and elevation patterns, sufficient gain and power handling capability for high-power transmitters and multi-programme multiplexes.

Protel UHF broadcasting antennas include:

  • Panel antennas that can be configured in vertical and azimuth arrays to shape the radiation pattern according to coverage masks and regulatory constraints.
  • Broadband yagi and log-periodic antennas used for gap-fillers, low-power transmitters, test sites and monitoring installations thanks to their wide operating bandwidth and directional patterns.
  • Dipole and ground plane antennas for auxiliary services, backup systems and local coverage needs in the UHF TV band.

In UHF broadcast installations, antennas are frequently combined into stacked or azimuth arrays, fed through sophisticated RF networks that share the system among several multiplexes. In this context, impedance, VSWR, isolation and power handling of the antennas must be fully compatible with combiners, filters and protection devices.

Other UHF professional applications between 300 and 870 MHz

Beyond TETRA, PMR and broadcasting, the 300–870 MHz range hosts a variety of professional services such as telemetry, SCADA, utility networks, wireless sensor systems and dedicated links for transport and industry. These applications often demand custom coverage, compact antennas and specific mounting options on poles, cabinets or vehicles.

Protel UHF antennas for these uses span from compact ground plane and dipole solutions to high-gain yagi and log-periodic arrays for long-distance links. Directional panel antennas are also employed for in-building distribution, tunnel coverage and confined environments where the field must be controlled precisely.

Guidelines for selecting UHF antennas 300–870 MHz

Selecting the correct UHF antenna in the 300–870 MHz band requires a clear definition of the service type (TETRA, PMR, public safety, broadcasting, telemetry), the coverage objectives, the installation constraints and the coexistence with other systems on the same site. Omnidirectional antennas are typically chosen for uniform coverage around the mast, while directional panel, yagi or log-periodic antennas are preferred when coverage must be shaped or extended along specific directions or corridors.

Key parameters include gain, horizontal and vertical beamwidth, polarisation, power handling, VSWR bandwidth, mechanical load and material selection. Protel UHF antennas in the 300–870 MHz range are designed to address these points, ensuring stable performance, robustness and compatibility with RF combiners, filters and other system components over the long term.

For the list of available models and detailed electrical and mechanical specifications, please refer to the following product catalogue pages:


CONTACT
COMPANY
NEW
OTHER APPLICATIONS
PROTEL Antennas Via Magellano 3 A/B 6
20090 CESANO BOSCONE (MILANO) ITALY
Phone+39.02.48600265 Fax+39.02.48600871
P.I. 09497700154 REA 126350
Copyright PROTEL
1988-2026 All Rights Reserved
Back to content