VHF antennas 108–300 MHz for aeronautical DAB and professional services
Role of the 108–300 MHz VHF band
The 108–300 MHz VHF band includes some of the most important frequency allocations for professional radio services: the aeronautical navigation and communication bands, part of the land mobile and special services spectrum, and the DAB digital radio broadcasting band in VHF Band III. Antennas operating in this range must guarantee stable performance, controlled radiation patterns and long-term reliability in critical environments such as airports, mountain sites and broadcast facilities.
Typical applications in the 108–300 MHz range include air–ground and ground–ground communications in aeronautical services, monitoring and interference direction-finding systems, DAB multiplex transmission from main and fill-in sites, as well as professional VHF networks for security, public utilities and industrial users. For all these scenarios, the antenna is a key element that directly influences coverage, quality of service and system availability.
Aeronautical band antennas 108–137 MHz and adjacent spectrum
In the aeronautical band, from 108 to 137 MHz, antennas are used for voice communications, navigation aids and surveillance systems around airports and along flight routes. These installations often operate in continuous service and must withstand severe climatic conditions while maintaining constant electrical characteristics over time.
Protel designs and manufactures different antenna types for aeronautical services in the 108–137 MHz range and adjacent frequencies:
- Omnidirectional ground plane antennas for airport services, apron control and monitoring, where uniform azimuth coverage around the site is required.
- Directional yagi antennas for point-to-point links, corridor coverage and direction-finding systems, where a narrow main lobe and high front-to-back ratio are needed.
- Log-periodic and panel antennas used when wider bandwidth, high gain or specific elevation and azimuth patterns are required, for example in approach sectors or interference monitoring systems.
In all these cases, the antenna design takes into account power handling, mechanical robustness, lightning protection and the need to minimise passive intermodulation in multi-transmitter sites.
DAB antennas in VHF Band III (174–230 MHz)
The DAB digital broadcast system uses VHF Band III, typically in the 174–230 MHz range. DAB antennas must provide defined radiation patterns and gain values, consistent with the coverage targets of each multiplex and with the network topology (main transmitters, gap-fillers, SFN or MFN configurations).
In this band Protel offers several types of professional DAB antennas:
- Ground plane and omnidirectional antennas for local and regional coverage, ideal for sites where symmetrical azimuth coverage around the mast is required.
- Directional yagi antennas for targeted coverage, fill-in transmitters and specific beam shaping requirements, with optimised gain and front-to-back ratio.
- Log-periodic antennas providing wideband operation across the DAB band and neighbouring channels, suitable for multi-service installations and monitoring systems.
Depending on the system design, DAB antennas can be installed as single radiators or combined into arrays to increase gain, shape the vertical pattern or comply with regulatory coverage masks. Mechanical and electrical design must also ensure compatibility with combiners and RF filters used in multi-programme transmitter sites.
Other professional VHF services between 150 and 300 MHz
The 150–300 MHz portion of the band hosts a variety of professional services, including land mobile networks, special radio services, telemetry and monitoring applications. Antennas used in this range often share design principles with aeronautical and DAB antennas, but are optimised for different channel plans, modulation formats and coverage requirements.
Protel VHF antennas in this spectrum include omnidirectional solutions for base stations, directional yagi arrays for point-to-point and corridor coverage, and log-periodic structures for wideband or multi-service systems. Careful selection of gain, polarisation and beamwidth allows the system designer to adapt the antenna to each specific project while preserving robustness and reliability.
Guidelines for selecting VHF antennas 108–300 MHz
Choosing the right antenna in the 108–300 MHz band starts from a clear definition of the service type (aeronautical, DAB, land mobile, monitoring), the required coverage area, the available installation height and the presence of other services on the same site. Omnidirectional ground plane antennas are suitable for uniform coverage around the mast, while directional yagi, log-periodic or panel antennas are preferred when the radiated energy must be concentrated in specific directions or sectors.
Other important parameters include power handling, VSWR bandwidth, mechanical load on the structure, material selection (aluminium, stainless steel) and compatibility with combiners and RF filters. Protel VHF antennas for 108–300 MHz are designed with these aspects in mind, to provide stable and predictable performance in professional and critical installations.
For the list of available models and detailed electrical and mechanical specifications, please refer to the following product catalogue pages: