Go to content

Multi-band antennas 660–3800 MHz for LTE UMTS 4G 5G Wi-Fi DAS and tunnel coverage - Protel Antennas - Professional Antennas for Telecomunications

Protel Antennas 38 years - 2026
Logo Protel antennas
PROFESSIONAL ANTENNAS
FOR TELECOMMUNICATIONS
SELECT THE FREQUENCY BAND
Skip menu
SELECT THE FREQUENCY BAND
Skip menu

Multi-band antennas 660–3800 MHz for LTE UMTS 4G 5G Wi-Fi DAS and tunnel coverage

Role of the 660–3800 MHz range for multi-band mobile and professional services

The 660–3800 MHz range covers many of the most important bands used by modern mobile and professional communication systems: LTE low bands around 700 and 800 MHz, GSM and LTE 900 MHz, LTE 1800 and 2100 MHz, LTE / 5G NR around 2600 MHz, Wi-Fi and ISM around 2.4 GHz and 5G NR bands in the 3.4–3.8 GHz area. Multi-band antennas operating across several of these sub-ranges are a key element in sites where different technologies, operators and services share the same infrastructure.

Protel multi-band antennas in the 660–3800 MHz family are designed to support LTE and UMTS, 4G and 5G NR, GSM and GSM-R where applicable, Wi-Fi 2.4 GHz and professional services deployed in tunnels, along transport corridors and on critical infrastructures. They are engineered for installation both inside railway, highway and metro tunnels and along external track sections and open-air routes, as well as for use as donor antennas outside the tunnel portals.

Global spectrum use and services in the 660–3800 MHz range

The exact band plans vary across regions, but several common usage patterns can be identified:

  • Low bands around 700–900 MHz: LTE and 5G NR low-band carriers (for example in 700, 800 and 900 MHz) used as coverage layers for mobile operators in Europe, the Middle East, Africa, Asia-Pacific and the Americas. In Europe and other areas, part of the 900 MHz range is also assigned to GSM-R railway systems, while FRMCS projects rely on dedicated railway bands that often share masts and towers with commercial LTE/5G equipment.
  • Capacity layers around 1700–2200 MHz: LTE 1800 (band 3), UMTS / LTE 2100 (band 1), AWS and PCS allocations in many countries worldwide, providing high-capacity 4G and 5G NR services in dense urban and suburban areas and along major transport routes.
  • Mid-bands around 2300–2700 MHz: LTE and 5G NR carriers used in several regions as additional capacity layers, combined with lower and higher bands through carrier aggregation.
  • 2.4 GHz Wi-Fi and ISM bands: used for Wi-Fi, telemetry, industrial and private systems, often coexisting with mobile network equipment at the same sites.
  • 5G NR bands in the 3.4–3.8 GHz range (n77 / n78): widely adopted as primary capacity bands for 5G NR in Europe, Asia-Pacific and other regions, often combined with lower LTE bands in multi-band and multi-sector deployments.

In many countries, mobile operators and infrastructure owners require antenna solutions that can handle several of these bands simultaneously, reducing the number of radiating elements on the mast and simplifying multi-operator, multi-technology deployments.

Professional multi-band antenna types in the 660–3800 MHz range

In this frequency range Protel designs and manufactures professional multi-band antennas based on directional and wideband structures:

  • Multi-band yagi antennas with optimised geometries to provide directional coverage across multiple mobile bands, for example combining low-band LTE, LTE 1800 / 2100 and 2.4 GHz services in a single antenna system.
  • Broadband and multi-band log-periodic antennas capable of covering wide portions of the 660–3800 MHz spectrum, ideal for measurement systems, monitoring, tunnel applications and sites where several LTE and 5G NR carriers must be received or transmitted using one antenna.
  • Quad-band and multi-band structures designed to operate in a defined set of bands (for example 790 / 870 / 960 / 1710–2170 / 2400 MHz), providing controlled radiation patterns and stable impedance in all operating sub-ranges.
  • Panel antennas / omnidirectional antennas used as part of distributed antenna systems (DAS), indoor coverage solutions and tunnel systems when compact, robust multi-band antennas with controlled patterns are required.

For tunnel and underground environments, Protel offers antenna families with flame-retardant fiberglass radomes, specifically engineered for harsh conditions and severe safety requirements in railway, highway and metro tunnels. These solutions are suitable both for antennas installed inside the tunnel and for donor antennas placed outside the portals.

Deployment scenarios: tunnels, donor antennas and corridor coverage

Protel multi-band antennas in the 660–3800 MHz range are deployed in many demanding scenarios:

  • Railway, highway and metro tunnels where directional and multi-band antennas are used together with leaky feeder cables or DAS topologies to guarantee continuous service along the whole underground section.
  • Donor sites at tunnel portals where multi-band antennas collect and transmit signals from outdoor macro networks to feed in-tunnel coverage systems, ensuring continuity of LTE, 5G NR and GSM / GSM-R services from open-air sections into the tunnel.
  • Corridor coverage along external track sections and roads where directional multi-band antennas build controlled sectors along railways, highways and metro lines, often in combination with FRMCS-related infrastructure and commercial LTE/5G equipment.
  • Macro and micro cell sites where several LTE and 5G NR bands must be combined on the same antenna system, reducing the number of radiating elements and optimising mast loading.
  • Private LTE / 5G and Wi-Fi systems for utilities, industry, ports, airports, logistics hubs and large campuses, where multi-band antennas simplify spectrum use and future upgrades.
  • Monitoring and measurement systems requiring stable and repeatable multi-band antenna performance over time for drive tests, fixed monitoring sites and quality of service verification.

Guidelines for selecting a 660–3800 MHz multi-band antenna

Choosing the right multi-band antenna in the 660–3800 MHz range depends on several parameters: which mobile and professional services are involved (LTE, UMTS, 5G NR, GSM, GSM-R, Wi-Fi, private LTE / 5G, FRMCS-related projects at site level), coverage objectives (tunnel, donor, corridor, indoor, macro / micro cell), installation constraints (available height, mast diameter, wind and ice load, coexistence with other antennas) and system-level requirements (MIMO, carrier aggregation, multi-operator sharing).

Protel multi-band yagi and log-periodic antennas are designed with a system-level approach: gain, bandwidth, beamwidths, polarisation, passive intermodulation performance and mechanical construction are defined to support long-term reliable service in mobile networks, railway and highway infrastructures, metro systems and complex tunnel and corridor applications, both inside the tunnel and at donor sites outside the portals.

For the list of available models and detailed electrical and mechanical specifications, please refer to the following product catalogue page:


CONTACT
COMPANY
NEW
OTHER APPLICATIONS
PROTEL Antennas Via Magellano 3 A/B 6
20090 CESANO BOSCONE (MILANO) ITALY
Phone+39.02.48600265 Fax+39.02.48600871
P.I. 09497700154 REA 126350
Copyright PROTEL
1988-2026 All Rights Reserved
Back to content